TEST 5153

The TEST 5153 study card interfaces with Micro controller and Microprocessor kits. It is used to study basics of Intel's 8251 chip using µProcessors / µControllers and using the card, helps students develop / design applications based on µP / µC.

SPECIFICATIONS

Compatible with CNT-IF, TINY-51 Kits.

This is a Study card for 8251 USART and 8253 Timer.

Facility to generate RXD, SD/BD, CTS & DSR signals through key switches.

10 LED's indicate status of all concerned signals of 8251.

Controls of GATE & CLOCK signals of 8253 through key switches.

System clock option is also available.

9 LED's to indicate status of all three timers.

Card Size: 125 x 130 mm.

TEST 5153A

SPECIFICATIONS

Compatible with CNT-IF, TINY-51 Kits.

This is a Serial interface card using 8251 USART.

8253 generates programmable baud clock.

Buffers signals for RS 232 interface on 25 pin 'D' male connector.

Card Size 125x130 mm.

TEST 55

The TEST 55-study card interfaces with Micro controller and Microprocessor kits. It is used to study basics of Intel's 8255 PIO chip using µProcessors / µControllers and using the card, helps students develop / design applications based on µP / µC.

SPECIFICATIONS

Compatible with CNT-IF, TINY-51 Kits.

Demo programs of all modes available. Compatible programs based on different kits supported now available.

PA0-PA7, PB0-PB7, PC0-PC7 LED indicators and test lug inputs with handshake signals.

Facility to generate ACKB/STBB, STBA & ACKA signals through key switches.

8 LED's to indicate status of Port C.

All IO signals on IOBUS compatible 26 pin FCC.

Option to select Interrupt output of 8255 to system Interrupt.

Card Size: 75 x 85 mm.

TEST 56

The TEST 56 study card interfaces with Micro controller and Microprocessor kits. It is used to study basics of Intel's 8155 PIO chip using µProcessors / µControllers and using the card, helps students develop / design applications based on µP / µC.

SPECIFICATIONS

Compatible with CNT-IF, TINY-51 Kits.

This is a Test card for 8155.

Demo programs of all modes available. Compatible programs based on different kits supported now available.

PA0-PA7, PB0-PB7, PC0-PC7 LED indicators and test lug inputs with handshake signals.

Separate key is provided to give manual clock for 8155 times I/P's.

Facility to generate STB, STBB signals through key switches.

CLKIN, CLKOUT, status on LED's.

All I/O lines on I/O bus, compatible to 26 pin FRC.

Option to select Interrupt Output of 8155 to system Interrupt's.

Card Size: 75 x 85 mm.

TEST 79

SPECIFICATIONS

This is a Study card for 8279.

Compatible with CNT-IF, TINY-51 Kits.

Demo of various modes for 8279 made easy.

LED Indication of status of Scan and Return lines.

Scanning clock is adjustable for demonstration.

Seven segment and digit selects on LED's.

LED Indication for Status Register FIFO.

Option to select Interrupt output of 8279 to system Interrupt's.

Card Size: 145 x 84 mm.

TEST 12

The TEST 12 study card interfaces with Micro controller and Microprocessor kits. It is used to study basics of Intel's 8212 chip using µProcessors / µControllers and using the card, helps students develop / design applications based on µP / µC.

SPECIFICATIONS

This is a Study card for 8212.

Compatible with CNT-IF, TINY-51 Kits.

Selection of I/O addresses through jumper.

Demo programs of all modes available. Compatible programs based on different kits supported now available.

LED Indication for Address Inputs and selected Outputs.

Facility for Enable and Clock signals through key switches.

Option to select the IC controls from Bus directly.

Card Size: 75 x 80 mm.

BMC 50

SPECIFICATIONS

Compatible with CNT-IF Kit.

Address, Data & Status Indication of CPU 8085 on 35 Nos. LED's.

Single machine cycle execution facilitates study of various machine cycles of 8085 CPU.

Expandable of 50 Pin FRC of any of our 8085 based kits.

Card Size: 100 x 100 mm.

MEMU 32K

SPECIFICATIONS

Compatible with CNT-IF, TINY-51 Kit

EPROM Emulator for 2764 through 27256.

32K battery back up RAM.

On line modifications in program makes it a powerful software development tool.

28 pin IC header plugs in to the memory socket of the target system.

Card Size: 90 x 90 mm.